Avaya Configuring SMDS Manual de usuario Pagina 50

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 60
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 49
Configuring SMDS
4-6 114069 Rev. A
Parameter: Heartbeat Poll
Default: Enable
Options: Enable
| Disable
Function: Enables or disables DXI heartbeat polling.
DXI Version 3.2 provides a heartbeat polling mechanism, which verifies
the integrity of the router/DSU connection. To implement heartbeat
polling, the router transmits a constant stream of keep-alive messages to
the DSU. The DSU, in turn, sends an acknowledgment to the router.
Instructions: Set to Enable to enable heartbeat polling. Set to Disable if the DSU/CSU
in your network does not support heartbeat polling.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.3.1.8
Parameter: Heartbeat Poll Interval
Default: 10 seconds
Range: 6 to 1023 seconds
Function: Specifies the time interval between each heartbeat poll message that the
router transmits. If you disable heartbeat polling, this parameter is
nonfunctional.
Instructions: Enter the number of seconds between the transmission of heartbeat poll
messages. Be sure to set the Heartbeat Poll Interval parameter to a value
greater than 5 seconds, the length of the heartbeat poll acknowledgment
timer. We recommend that you accept the default value.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.3.1.9
Vista de pagina 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 59 60

Comentarios a estos manuales

Sin comentarios