Avaya Configuring SMDS Manual de usuario descargar pdf (Pagina 42)

Configuring SMDS

3-2 114069 Rev. A

Enabling SMDS on an Interface

To enable SMDS on an interface, complete the following steps.

1. Select SMDS from the WAN Protocols menu; this menu appears after

you select a link or net module connector that requires a WAN circuit.

Site Manager automatically enables protocol prioritization when you select

SMDS. For detailed information on protocol prioritization, refer to

Conﬁguring Trafﬁc Filters and Protocol Prioritization.

2. Click on OK to enable default SMDS.

The Conﬁguration Manager displays the SMDS Conﬁguration window

(Figure

3-1).

3. Conﬁgure the SMDS parameters (Individual Address, Group Address,

and ARP Address) using the descriptions that follow as a guide.

4. When you have conﬁgured all the parameters, you can do one of the

following:

-- Enable default SMDS. To do this, click on OK.

-- Edit the default values. To do this, click on Details. (Refer to Chapter

for instructions.)

Figure 3-1. SMDS Conﬁguration Window

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 59 60

Sin comentarios

Avaya Configuring SMDS Manual de usuario Pagina 42