Avaya Configuring OSI Services Manual de usuario descargar pdf (Pagina 72)

Configuring OSI Services

3-4

303535-A Rev 00

Parameter: Area Address (hex)

Default: 0x490040

Options: Any valid OSI area address entered in hexadecimal notation that is

between 3 and 13 bytes long

Function: Identifies the local area in the routing domain where the router resides.

Instructions: If you registered your OSI network with an addressing authority, the area

address also reflects the location of the router in the global addressing

domain. Enter the entire area address portion of the NSAP address

allocated to your network as follows:

• Check with your administrative authority to determine the NSAP

addresses that have been allocated to your OSI network.

• Enter the entire area address portion of the NSAP address that reflects

the location of the router, including the routing domain and area

portions that identify where in the local network the router resides.

Either you or your administrative authority should provide the

identifiers for the local routing domain and area portions of the

address.

• If you have not registered your OSI network with an addressing

authority, then you can accept the default area address (0x490040).

MIB Object ID: 1.3.6.1.4.1.18.3.5.6.13.1

Note: You must assign the same area address to all routers residing in the

same local area. You must assign different area addresses to routers that reside

in different areas.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 137 138

Sin comentarios

Avaya Configuring OSI Services Manual de usuario Pagina 72