Avaya Configuring OSI Services Manual de usuario descargar pdf (Pagina 103)

Editing OSI and TARP Parameters

303535-A Rev 00

4-29

Parameter: External Address Metric

Default: 20

Options: 1 to 63

Function: Specifies the relative cost of using this interface to reach the external

adjacency.

If there are multiple interfaces configured to the same external adjacency,

the OSI router will route all external domain traffic using the interface

that has been assigned the lowest external address metric.

Instructions: If you only have a single link to the external adjacency, or have no

preference regarding which interface is used to access the external

domain, accept the default value.

If there are multiple interfaces configured to the same external adjacency,

and you want this interface to be used regularly, then assign it the lowest

external address metric. Similarly, assign it a high cost if you do not want

it to be used regularly.

MIB Object ID: 1.3.6.1.4.1.18.3.5.6.4.7

Copying Static External Address Adjacencies

To copy a static external address adjacency:

Select the adjacency that you want to copy from the list in the OSI

External Address Adjacency List window (refer to Figure 4-6).

Click on Copy.

Specify the external address for the new adjacency.

Click on Save.

Repeat steps 1 through 4 to copy additional adjacencies.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 137 138

Sin comentarios

Avaya Configuring OSI Services Manual de usuario Pagina 103