Avaya Configuring DECnet Services Manual de usuario descargar pdf (Pagina 53)

Editing DECnet Parameters

308619-14.00 Rev 00

3-15

Parameter: End Nodes MAC

Default: None

Options: Frame Relay multicasting address

SMDS group address

Function: Assigns the All Endnodes multicast MAC address value to this circuit for

use over frame relay and SMDS WAN connections. The multicast MAC

address value you specify here determines the destination address for

DECnet end node broadcast traffic across the frame relay or SMDS cloud.

This parameter is valid only if this circuit is a frame relay or SMDS

circuit.

Instructions: Enter the multicasting address (frame relay circuits) or group address

(SMDS circuits) that you obtain from your service provider. If you do not

specify a value for this parameter, broadcast traffic will be sent to all

virtual circuits configured on the interface.

MIB Object ID: 1.3.6.1.4.1.18.3.5.2.2.1.31

Parameter: End Routers MAC

Default: None

Options: Frame Relay multicasting address

SMDS group address

Function: Assigns the AllRouters multicast MAC address value to this circuit for

use over frame relay and SMDS WAN connections. This allows you to

specify a destination address for DECnet Level 1 broadcast traffic across

the frame relay or SMDS cloud. This parameter is valid only if this circuit

is a frame relay or SMDS circuit.

Instructions: Enter the multicasting address (frame relay circuits) or group address

(SMDS circuits) that you obtain from your service provider. If you do not

specify a value for this parameter, broadcast traffic will be sent to all

virtual circuits configured on the interface.

MIB Object ID: 1.3.6.1.4.1.18.3.5.2.2.1.32

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 79 80

Sin comentarios

Avaya Configuring DECnet Services Manual de usuario Pagina 53