Avaya Configuring DECnet Services Manual de usuario descargar pdf (Pagina 39)

308619-14.00 Rev 00

3-1

Chapter 3

Editing DECnet Parameters

After you enable a DECnet interface, you can use Site Manager to:

• Edit DECnet parameters.

• Add, edit, or delete a static route, a static adjacency, or the DECnet IV to V

Transition.

• Delete DECnet globally from the Nortel Networks router.

The instructions in this chapter assume that you have already configured at least

one DECnet interface. If you have not yet configured a DECnet interface, or if you

want to add additional DECnet interfaces, refer to Chapter 2, “Enabling DECnet

Services.”

If you have a mixed Phase IV and Phase V network, see Configuring OSI Services

for details on configuring OSI. For instructions on configuring DECnet filters, see

Configuring and Managing Routers with Site Manager.

For each DECnet parameter, this guide provides the default setting, valid

parameter options, the parameter function, instructions for setting the parameter,

and the management information base (MIB) object ID.

Note:

You must configure both DECnet Phase IV and OSI on each network

interface participating in a DECnet IV to V Transition.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 79 80

Sin comentarios

Avaya Configuring DECnet Services Manual de usuario Pagina 39