Avaya Business Communications Manager Release 5.0 Guía de configuración descargar pdf (Pagina 7)

Reviewed:

03/25/2010

BCM Test Lab Application Notes

7 of 13

BCM_Configuration_Guide_For

PAETEC.doc

2009-00002460

5. System Configuration

This section provides procedures for configuring a SIP trunk on BCM Rls. 5.0 to PAETEC

5.1. BCM Configuration

In order to configure a SIP trunk between BCM and PAETEC do the following:

5.1.1. Line Pool Configuration

1. Under Configuration

Telephony

Dialing Plan; select Line Pools.

2. Select BlocA.

3. Click on the “Add” button to add DNs of sets that need to access the above line pool.

5.1.2. Dial Plan Configuration

1. Under Configuration

Telephony

Dialing Plan

Public Network, define the Public

Received number length to “4” digits

2. Set the Public Network Dialing Plan to Public (Unknown)

3. Under Configuration

Telephony

Dialing Plan

Routing, and select the Routes tab

4. Add a route by clicking on the Add button.

5. In the Add Route dialog box, provide an unused route and click on the OK button.

6. The Dialing Plan – Routing table will be displayed.

7. Click on the route just created

8. Under the Use Pool column, double click to select BlocA from the drop down list.

9. Under the DN Type column, double click to select Public (Unknown) from the drop down list

10. Click on the Destination Codes tab.

11. Configure a destination code to route dialed digits by clicking on the Add button. Digits that begin

with this destination code will be presented to the SIP trunking component on the BCM for routing

towards the Service Provider.

12. In the Add Destination Code dialog box, enter a numeric number for the destination code and

click on the OK button.

13. Select the row representing the Destination Code entered in the previous step

14. Under Normal Route column, double click and enter the route entered in Step 4.

15. Under the Absorbed Length column, specify the number of digits that will be absorbed before

sending the rest of the digits to the service provider.

1 2 3 4 5 6 7 8 9 10 11 12 13

Comentarios a estos manuales

Sin comentarios

Avaya Business Communications Manager Release 5.0 Guía de configuración Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya Business Communications Manager Release 5.0