Avaya Business Communications Manager Release 5.0 Guía de configuración descargar pdf (Pagina 10)

Reviewed:

03/25/2010

BCM Test Lab Application Notes

10 of 13

BCM_Configuration_Guide_For

PAETEC.doc

2009-00002460

o CLID Override: Provide the DID assigned to this account

o Display name Override: Provide the Display Name that will be presented to

the called party.

o Contact Override: Leave blank

o Maddr in Contact: Leave unchecked

o Local Domain Override: Leave blank

• For the BroadWorks SIP trunking Service enable Registration for this SIP Account by

checking the checkbox next Registration.

o In the Registration Details section for the BroadWorks service configure the

registration details as follows:

 Registrar: IP address or Domain name of the Registrar or SBC

(provided by PAETEC) where all SIP signaling must be sent.

 Registration Port: Provide the optional UDP port number for the

registrar

 Expiry: Leave the default value

• Click the OK button

5.1.7. IP Sets Media Parameters

1. Under Configuration

Resources

Telephony Resources: Select module type “IP Sets”

and click on “IP Terminals Global Settings”.

2. Set the “Default Codec” for IP sets to Auto and set the payload size (ms) for G.729 and G.711 to

5.1.8. Configuring Incoming Calls from PAETEC to BCM

This can be done in one of two ways;

1. The DID associated with the PAETEC SIP account assigned to the BCM can be associated

with a target line assigned to a group of set(s) and all calls to the DID will be routed those

set(s).

2. All calls to the DID associated with the PAETEC SIP account assigned to the BCM can be

answered by the Auto Attendant (AA) and from there, a DN can be entered to reach a phone

on the BCM

5.1.8.1 Assigning DID to BCM Phones for Incoming Call

1. Navigate to Configuration

Telephony

Lines

Target Line and click on an unused

target line

2. On the selected Target Line, set the “Pub. Received #” to the last 4-digis of the PAETEC

assigned DID.

3. Assign the DN of phones on the BCM that require an appearance on this target line. This will

be the phones that will be alerted when call to the PAETEC assign DID is received.

1 2 ... 5 6 7 8 9 10 11 12 13

Comentarios a estos manuales

Sin comentarios

Avaya Business Communications Manager Release 5.0 Guía de configuración Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya Business Communications Manager Release 5.0