Avaya BRI Based Video Conferencing on BCM Technical Guía de configuración descargar pdf (Pagina 13)

BCM Technical Configuration Guide V1.1 May, 2006

_______________________________________________________________________________________________________________________

NORTEL External Distribution

2.5 Loops

The physical characteristics of the BRI interfaces are defined in the following steps. Follow the screen captures to

ensure that each programmable field is set correctly.

Figure 10: Loops

Associate both DNs to the loop.

Figure 11: Loop - Assigned DNs

2.6 Routing

Video calls will be dialed directly from the video unit, and will use the dialplan programmed into the BCM. For this

example, we have pre-determined that the PRI lines have been pooled into pool PRI-A, and that the access code

for this pool is 6. Follow the screen captures below to ensure that the routing in your system is consistent with the

customer preferences.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19

Sin comentarios

Avaya BRI Based Video Conferencing on BCM Technical Guía de configuración Pagina 13