Avaya BCM First Time Guía de instalación descargar pdf (Pagina 9)

Installation overview / 9

P0993238 Issue 01

14. If all the information is correct, click the Apply button.

15. After the system reboots, continue with setting up your Business Communications

Manager system. For details, refer to the Business Communications Manager 3.0

Programming Operations Guide.

Note: If you are using an Ethernet crossover cable, you can now connect the data

networking wiring to the BCM200 or BCM400.

Programming the Business Communications Manager system

After you have set the initial configuration parameters, you can connect the Business

Communications Manager system to the network and program the telephony and data

networking features. For information about configuring the telephony and data networking

parameters, refer to the Business Communications Manager 3.0 Programming Operations

Guide.

Additional information

For more information about installing the BCM200 or BCM400 (such as wiring charts and

cable diagrams), refer to the Business Communications Manager 3.0 Installation and

Maintenance Guide.

Installing a WAN card

1. Attach one end of the grounding strap to your wrist and the other end to a grounded metal

surface.

2. Remove the Base Function Tray latch screws and place them in a safe location.

3. Move the Base Function Tray latches to the unlock position.

4. Grasp the Base Function Tray latches and partially remove the Base Function Tray from

the BCM200 or BCM400. Do not exert force on the DS30 cables or connectors.

5. Do not exert force on the DS30 cables and connectors. Disconnect the DS30 cable

connectors from the MSC card.

6. Remove the Base Function Tray completely from the BCM200 or BCM400.

7. Place the Base Function Tray on a flat, clean and static-free surface.

8. Remove the bezel screws from the Base Function Tray face and place them in a safe

location.

Tip

In certain situations, you may not be able to connect the Business Communications Manager system to the

network and use Unified Manager. (For example, the network is not installed or the network has restricted

access.) In these situations, you can connect to the Business Communications Manager system using an

Ethernet crossover cable and use Unified Manager. With this connection, you can program all of

parameters on the Business Communications Manager system.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Sin comentarios

Avaya BCM First Time Guía de instalación Pagina 9