Avaya BCM First Time Guía de instalación descargar pdf (Pagina 11)

Installation overview / 11

P0993238 Issue 01

5. If you are using a computer, start your terminal emulation program.

6. Press the Enter key.

7. For User ID, type ee_admin and press the Enter key.

8. For Domain, press the Enter key.

9. For Password, type eedge and press the Enter key.

10. Press the 1 key to access the Platform Initialization Menu page.

11. Press the 1 key to access the Initialize Menu page.

12. Press the 1 key to select the Initialize Universal Profile option.

The Business Communications Manager system reboots to enable the WAN card.

Changing the default IP address

If you cannot use the default IP address on your network, you must change the IP address of

the Business Communications Manager system using:

• a null modem cable

• an Ethernet crossover cable

After you change the default IP address, you can use the Quick Install wizard to set the initial

configuration parameters.

Changing the IP address using a null modem cable

To use a null modem cable, you must have a VT100 compatible terminal or a computer that

has a VT100 compatible terminal emulation program. The terminal or terminal emulation

program must support the VT100 National Character set.

Set the transmission parameters of your terminal or terminal emulation program to:

• 9600 bits per second

• 8 data bits

• no parity

• 1 stop bit

• hardware flow control

To change the IP address:

1. Make sure the Status LED is on. This LED indicates that the BCM200 or BCM400 is

operating correctly.

2. Attach the null modem cable to the serial port on the BCM200 or BCM400.

3. Attach the other end of the null modem cable to the serial port on the terminal or

computer.

1 2 ... 6 7 8 9 10 11 12 13 14

Sin comentarios

Avaya BCM First Time Guía de instalación Pagina 11