
WLAN IP Telephony Configuration
NN40011-038 Issue 1.2 BCM Rls 6.0 7
The basic WLAN IP Telephony network consists of the following components:
Business Communications Manager
TFTP Server (optional)
DHCP Server (optional)
WLAN IP Telephony Manager 2245
WLAN Handset 2210/2211/2212/6120/6140
Access Point (AP)
Required Information / Equipment
To support the WLAN IP Telephony / Handsets:
The BCM system must run Release 3.6.1 (patch) or later software
versions. BCM systems with 3.6 or earlier software versions must be
upgraded to support the handsets.
BCM50 Release 2 or later will support WLAN IP Telephony.
BCM450 Release 1 or later will also support WLAN IP Telephony.
A TFTP Server is required to distribute firmware to the WLAN Handsets
and WLAN IP Telephony Manager 2245. It can reside on a different
subnet than the BCM and APs. The TFTP Server can be located on
either side of the firewall.
Telephony Programming must be completed on the BCM.
IP Clients keycode must be installed on the BCM.
IP Terminal Registration must be enabled on the BCM.
A range of IP Addresses is required to be assigned to each handset for
recognition by the BCM
A range of additional IP Addresses is required to be assigned to each
handset by the WLAN IP Telephony Manager 2245.
Comentarios a estos manuales