Avaya Multisite Business Communications Manager Systems Manual de usuario Pagina 61

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 70
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 60
Configuring VoIP lines 61
Refer to Table 25 "SIP Settings fields" (page 61) for more information.
Table 25
SIP Settings fields
Field Value Description
Disabled
Enabled-TDM
Fallback to
circuit-switched
Enabled-All
Defines how you want the system to handle calls
that the system fails to send over the VoIP trunk.
Enabled-TDM enables fallback for calls
originating on digital telephones. This is useful
if your IP telephones are connected remotely,
on the public side of the BCM network, because
PSTN fallback is unlikely to result in better quality
of service.
Domain Name
Type the domain name of the SIP network.
Call signaling port
<port value> If VoIP applications are installed that require
nonstandard call signaling ports, enter the port
number here. Port number 0 means that the
system uses the first available port.
UDP
Outgoing Transport
TCP
Proxy
If entered, all SIP calls originate to this address.
Status
Read Only This field displays the current status of the
Gatekeeper.
—End—
Configuring VoIP lines
Voice over IP (VoIP) lines simulate traditional Central Office (CO) lines. VoIP
lines transmit data over an IP network rather than over physical lines.
Configuring VoIP lines
Step Action
1 Log on to Element Manager.
2
In the Task Navigation Panel, select the Configuration tab.
3
Select Telephony > Lines > All Lines.
4
Highlight the individual line you wish to configure.
5
Select the Preferences tab.
See Figure 17 "Preferences" (page 62).
Enterprise: Common
Solution Integration Guide for Multisite Business Communications Manager Systems
NN49000-303 01.01 Standard
Release 4.0, 3.7 29 June 2007
Copyright © 2007, Nortel Networks
.
Vista de pagina 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 69 70

Comentarios a estos manuales

Sin comentarios