
Installing a System Processor Card in the Passport 5430 Multiservice Access Switch
1-6
306311-A Rev 00
Module 1 Port LEDs
Table 1-2
describes the system processor card (module 1) Port 1 and Port 2 LEDs.
Sys Off System processor card was not tested.
On (green) System processor card is operating properly.
Slow flashing (green) System processor card is running its diagnostic
tests.
Rapid flashing (green) System processor card failed its diagnostic tests.
cPCI Off Expansion cards or voice processor cards not
tested.
On (green) One or more expansion cards or voice processor
cards is installed and operating properly.
Slow flashing (green) One or more expansion cards or voice processor
cards is running its diagnostic tests.
Rapid flashing (green) One or more expansion cards or voice processor
cards failed its diagnostic tests.
Table 1-2. System Processor Card Port LEDs
LED State Meaning
TX (Transmit)/
RX (Receive)
Off No transmit or receive activity
On (green) Port interface is transmitting or receiving data.
On (amber) Port interface detects a collision.
SPD Off Port is in 10 Mb/s mode.
On (green) Port is in 100 Mb/s mode.
Link Off Link is not active.
On (green) Link is active.
Table 1-1. System Processor Card Console LEDs
(continued)
LED State Meaning
Comentarios a estos manuales