Avaya BSGx4e CLI Guía de usuario descargar pdf (Pagina 181)

3 Configuration commands Voice Commands

NN47928-107 181

voice np

When an analog device, such as a phone, is connected to the FxS port on

the BSGX4e, a numbering plan can be needed to make full use of the

features of the device. The SIP integrated gateway uses a numbering plan to

interpret any string entered.

The plan is a series of entries, each defining how a specific string is to be

interpreted. When the gateway receives a string from the analog device, it

compares the string to the entries in the numbering plan and translates it

as needed before the string is sent to the server.

For service codes, the digits dialed are sent without modification.

Every service request entry must end with a hash character [#] to activate

the service. For example, if the Do Not Disturb code is set to *78, then an

entry to activate Do Not Disturb for a phone is *78#.

For phone numbers, the string of digits can be translated as follows:

z A number of digits can be stripped from the beginning of the number.

z A string of digits can be prepended to the beginning of the number.

Note: Before the numbering plan is configured, the SIP gateway must be

configured.

This command is applicable to the SIP UA only.

Syntax config voice np <number> type [number|service] feature

<number> stripcount <digits> prepend <digits>

Parameters number Enter a string translated by the entry.

type number|service

Indicate whether the entry type is for a number

or a service code.

Feature

none No feature type.

SDND Set Do Not Disturb. Applicable only if type

parameter is set to service.

CDND Clear Do Not Disturb. Applicable only if type

parameter is set to service.

SFWA Set Forward All. Applicable only if type

parameter is set to service.

CFWA Clear Forward All. Applicable only if type

parameter is set to service.

SFWB Set Forward on Busy. Applicable only if type

parameter is set to service.

CFWB Clear Forward on Busy. Applicable only if type

parameter is set to service.

SFWNA Set Forward No Answer. Applicable only if type

parameter is set to service.

1 2 ... 176 177 178 179 180 181 182 183 184

Sin comentarios

Avaya BSGx4e CLI Guía de usuario Pagina 181