Avaya Configuring Data Compression Services Manual de usuario descargar pdf (Pagina 25)

Starting Compression

114061 Rev. A 1-3

Starting Data Compression

You enable data compression for PPP and Frame Relay differently from X.25.

Starting Data Compression for Frame Relay and PPP

Enable WCP. You can also enable other protocols that you want to conﬁgure.

Starting Data Compression for X.25

You enable WCP only after you have added a service record. You can also enable

other protocols at the same time.

You must also enable the X.25 service record compression parameter for each

X.25 interface that you conﬁgure.

See Conﬁguring X.25 Services for further information about X.25 service records.

Finding Further Information

For detailed information on Bay Networks data compression, refer to Chapter 2.

For information and recommendations about using nondefault values, refer to

Chapter 3.

Note: If you have a hardware compression net module on an ASN, you can

use hardware compression on any WAN port on that single router or slot.

Hardware compression on the ASN does not work across slots; that is, it does

not provide compression for any other ASNs in the stack.

Site Manager Path: In the Select Protocols window, scroll down to select

WCP. Click on OK.

Site Manager Path: After you have conﬁgured a service record, in the Service Record

Window, select Protocols > Add/Delete. The Select Protocols window appears. Scroll

down to select WCP. Click on OK.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 53 54

Sin comentarios

Avaya Configuring Data Compression Services Manual de usuario Pagina 25