Avaya Analog Devices Guía de configuración descargar pdf (Pagina 10)

10 Chapter 2 Configuring an analog device DN record

P1013653 02

3 Click on the DN record (DN XXXX) for an analog device.

4 Click on the General heading.

Figure 2 General screen example

5 Use the table below to assign a name to the analog device.

Table 5 General record fields

Line access

Line access settings allows you to assign lines or line pools to an analog device. After lines and

line pools are assigned, you can choose a prime line for the analog device. The prime line is the

line that is automatically selected when a call is made from an analog device.

Figure 3 Line access screen example

Read these notes for more information about assigning lines and line pools.

• You can assign any number of lines to an analog device. Only two lines can be answered at any

one time on an analog telephone and one line at a time on a fax machine.

Attribute Values Description

Name <up to seven

alphanumeric characters>

This setting shows the DN number for the analog device.

Use this setting to provide a more specific description of the device, such

as the last name of the user or the device location.

Model Other This is a read-only setting when the analog device is installed on the

system.

Other represents analog devices.

Device port <port number> This read-only setting shows the port number for the DN.

Note: For a detailed explanation on all general record fields, refer to the Business

Communications Manager Programming Operations Guide.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Avaya Analog Devices Guía de configuración Pagina 10