Avaya FireWall-1 Manual de usuario descargar pdf (Pagina 31)

BaySecure FireWall-1

116751-A Rev. A 1-19

To enable the ﬁrewall, select Protocols > Global Protocols > FWALL >

Global.

The F.W. Global window opens (F

igure 1-11) to verify that you want to

enable a ﬁrewall to be active on the router. Click on OK.

Figure 1-11. F.W. Global Window

To conﬁgure the ﬁrewall, select Protocols > Global Protocols > FWALL >

FWALL Router PARAMS.

A warning box appears, indicating that you may need to establish a static

route between the router and the management station before you conﬁgure the

parameters.

If you do not establish a static route and your management station and router

are on different subnets, you will be unable to communicate with the router.

Refer to Conﬁguring IP Services for information about creating a static route.

7. Click on OK.

Note: After you create a ﬁrewall on the router, you cannot remove it.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 37 38

Sin comentarios

Avaya FireWall-1 Manual de usuario Pagina 31