Avaya CS1000 Manual de usuario Pagina 274

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 456
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 273
274 Table: eESPA
Table 15
Espa record: SOH1STX1US12345RS2USThe messageRS3US9RS4US3RS6U
S3ETXBCC (cont’d.)
RS Record separator
BCC Checksum
The incoming alarm/message, must be translated to a valid message
request and sent to the eKERNEL, as shown in Figure 205 "Example:
eESPA module acts as input program" (page 274).
Figure 205
Example: eESPA module acts as input program
If the specified data identifier is not present in the available datastream
record, than the field eESPA_Group_default_str must be used to define a
group in the message request.
If this eESPA module acts as an output program: In the current
release, the data identifiers for the espa records are fixed. Therefore,
when a message request is sent by the eKERNEL to the eESPA module,
the data in the <group> tag is put in data identifier 1 (call address).
In the following authorized, the data in the <group> tag from the message
request, must be translated to data identifier 1 (call address) in the espa
record.
Nortel Communication Server 1000
DECT Messenger Installation and Commissioning — Book 2
NN43120-301 02.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.
Vista de pagina 273
1 2 ... 269 270 271 272 273 274 275 276 277 278 279 ... 455 456

Comentarios a estos manuales

Sin comentarios