Avaya Configuring Traffic Filters and Protocol Prioritization Manual de usuario descargar pdf (Pagina 126)

Configuring Traffic Filters and Protocol Prioritization

7-18

308645-15.0 Rev 00

Enabling or Disabling an Outbound Traffic Filter

There may be times when you want to turn off a filter temporarily. Instead of

deleting a filter from a circuit, you can disable the filter and then reenable it later.

To disable or reenable an outbound traffic filter:

Site Manager Procedure

You do this System responds

1. Display the Priority/Outbound Filters

window (Figure 7-2).

2. Select the filter to disable or enable. The Filter Enable and Filter Name fields

show the current status of the selected

filter.

3. Click on

Values

. The Values Selection window opens.

4. To disable the filter, select Disabled. To

enable the filter, select Enabled.

5. Click on

. The Values Selection window closes. The

Filter Enable field in the Priority/

Outbound Filters window indicates the

change.

6. Click on

Apply

. The filter’s action is now disabled or

enabled.

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 201 202

Sin comentarios

Avaya Configuring Traffic Filters and Protocol Prioritization Manual de usuario Pagina 126