Avaya Configuring TDM Services Manual de usuario Pagina 23

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 58
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 22
Customizing TDM
309426-14.10 Rev 01
2-3
Making a Switched H.110 TDM Circuit Connection
By default, the router uses a switched H.110 circuit, which can connect two local
dual synchronous connectors. Use this type of circuit to connect video
conferencing equipment that connects to the same router.
Using the BCC
To connect both ends of a switched H.110 TDM circuit, you must create entries
for two dual synchronous connectors and then connect them.
1.
Create an entry for the first dual synchronous connector.
To create an entry for the first dual synchronous board, at the box prompt (for
example,
box#
) enter:
dsync
slot
<slot_number>
pci-slot
<pci_number>
module
<mod_number>
connector
<connector_number>
slot_number
is the slot number containing the dual synchronous module. The
slot number for the dual synchronous module is always 1.
pci_number
is the number of the pci-slot containing the dual synchronous
board.
module_number
is a convention used within the Passport 5430 chassis.
connector_number
is the connector associated with this interface.
For example, to create an entry for the first dual synchronous connector
located at slot 1, pci-slot 4, module 2, connector 2, enter:
box#
dsync/1/4/2/2#
dsync slot 1 pci-slot 4 module 2 connector 2
dsync/1/4/2/2#
2.
Create an entry for the second dual synchronous connector.
To create an entry for the second dual synchronous connector, navigate to the
second dual synchronous board prompt (for example,
box#; dsync 1/4/2/2)
and enter:
dsync
slot
<slot_number>
pci-slot
<pci_number>
module
<mod_number>
connector
<connector_number>
Note:
Once you connect the PORT connector to the other end of the circuit,
you cannot modify the circuit type. To modify the circuit type, you must first
unconnect the port.
Vista de pagina 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 57 58

Comentarios a estos manuales

Sin comentarios