Avaya Configuring DLSw Services Manual de usuario descargar pdf (Pagina 168)

Configuring DLSw Services

5-32

303523-A Rev. 00

Parameter: Backup Start Time (hhmm)

Default: 1

Options: 0 to 2400

Function: Specifies the start time when a configured backup peer is available.

During this time period, the local router can establish a TCP connection

with this backup peer if the primary peer is unreachable.

Instructions: Type the start time in hhmm format, where hh is hours and mm is minutes.

For example, typing 0820 specifies 8:20 a.m., and 2400 specifies

12:00 midnight. Type 0 to disable the Backup Start Time parameter.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.5.1.15

Parameter: Backup End Time (hhmm)

Default: 1

Options: 1 to 2400

Function: Specifies the end time when a configured backup peer is available. During

this time period, the local router can establish a TCP connection with this

backup peer if the primary peer is unreachable.

Instructions: Type the end time in hhmm format, where hh is hours and mm is minutes.

For example, typing 0820 specifies 8:20 a.m., and 2400 specifies 12:00

midnight. The Backup End Time parameter is disabled if the Backup Start

Time is set to 0.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.5.1.16

Adding a DLSw Peer IP Table Entry

To add a new DLSw Peer IP Table entry, begin at the DLSw Peer Configuration

window (refer to Figure 5-10) and then

Click on Add.

The second DLSw Peer Configuration window appears (Figure 5-11)

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 291 292

Sin comentarios

Avaya Configuring DLSw Services Manual de usuario Pagina 168