Avaya Bay Command Console Manual de usuario descargar pdf (Pagina 129)

117383-D Rev 00

E-1

Appendix E

Syntax for Module Location

Table E-1 lists the syntax for specifying the physical location of a module for each

Bay Networks device that the BCC supports.

Table E-1. Syntax for Specifying Module Location per Device

Platform Syntax

AN/ANH

•

= interface type: ethernet, token-ring, serial, etc.

•

<slot>

= 1 (AN/ANH is a one-slot device).

•

numbering starts with connector 1.

Example:

ethernet slot 1 connector 3

This is an Ethernet interface configured on AN/ANH connector 3, which exists on an

Ethernet adapter module. (Connectors 1 and 2 are on the base module.)

ASN

•

= interface type: ethernet, token-ring, serial, etc.

•

<slot_number>

= 1, 2, 3, or 4, depending on the setting of the module ID switch on

each ASN.

•

numbering corresponds to net module numbering (1 through 4) on each

ASN.

•

numbering starts at 1 on each net module (per media type).

Example:

ethernet slot 2 module 3 connector 2

This is an Ethernet interface on connector 2 of net module 3, in ASN 2 of a stacked ASN

configuration.

(continued)

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 139 140

Sin comentarios

Avaya Bay Command Console Manual de usuario Pagina 129