Avaya Bay Command Console Manual de usuario descargar pdf (Pagina 40)

Using the Bay Command Console (BCC)

2-12

117383-C Rev. 00

Displaying Objects at the Next Subcontext Level

To display by BCC instance identifier any objects configured at the next

subcontext level accessible from your current location in configuration mode, use

the

lso or lso -list (lso -l) commands.

Example:

Display in tabular format a list of objects configured on the current object. Show

the BCC instance identifier of each configured object.

box#

lso

board/1 board/4 dns ip telnet

board/2 board/5 ethernet/2/1 snmp tftp

board/3 console/1 ftp syslog

Example:

Display in nontabular format a list of objects configured on the current object.

Show the BCC instance identifier of each configured object.

box#

lso -l

board/1 board/2 board/3 board/4 board/5 ftp snmp tftp console/1

telnet ethernet/2/1 ip dns syslog

Displaying Objects at All Subcontext Levels

To display in hierarchical format the active configuration of the current object and

any other dependent objects configured on the same branch, use the

show config -recursive command.

Example:

box# eth 2/1

ethernet/2/1# show config -r

ethernet slot 2 connector 1

circuit-name E21-alpha

ip address 192.168.125.34 mask 255.255.255.224

broadcast 192.168.125.32

arp

back

rip

back

Output of the show config -r command includes any back commands necessary

for navigation back from the current context to the prior context.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 129 130

Sin comentarios

Avaya Bay Command Console Manual de usuario Pagina 40