Avaya Bay Command Console BCC Manual de usuario descargar pdf (Pagina 58)

Using the Bay Command Console (BCC)

4-2

303562-A Rev. 00

You may find it helpful to first diagram what you want to configure in terms of the

BCC configuration tree or hierarchy for the device. Refer to the following sample

router configuration.

Sample Router Configuration

The following example shows a sequence of commands you can use to configure a

BCN router on a network. You first complete the physical installation of the

router, then boot the router using the image (bn.exe) and the minimum

configuration file (ti.cfg).

This example creates the following objects in the total router configuration

(Figure 4-1

• IP (global)

-- ARP (global) on IP

-- RIP (global) on IP

• SNMP (global)

-- Community “public” on SNMP

- Manager (address 0.0.0.0) on community “public”

• FTP (global)

• TFTP (global)

• Telnet (global)

-- Server (global) on Telnet

• Quad Ethernet interface in slot 13

-- IP interface (address 192.168.133.114) on Ethernet connector 1

- ARP on IP interface 192.168.133.114

- RIP on IP interface 192.168.133.114

• Serial interface in slot 5

• Dual token ring interface in slot 9

• FDDI interface in slot 11

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 103 104

Sin comentarios

Avaya Bay Command Console BCC Manual de usuario Pagina 58