Avaya Configuring RADIUS Manual de usuario descargar pdf (Pagina 37)

Customizing the RADIUS Client Configuration

117385-B Rev 00

3-3

Modifying the Authentication and Accounting Services

The default for both accounting and authentication is disabled. Use the steps in

this section to:

• Enable a slot for accounting, authentication, or both of these services.

• Configure the direction you want for generating accounting requests.

Using the BCC

By default accounting and authentication are disabled, to enable either one or both

of these services, navigate to the

radius-client#

prompt for the slot you want to

modify and enter one or both of the following commands:

accounting enabled

authentication enabled

For example, the following command enables accounting for the RADIUS client

on slot 2:

radius-client/2#

accounting enabled

If you want to disable accounting and enable authentication to the RADIUS client,

navigate to the

radius-client#

prompt for the slot you want to modify and enter:

accounting disabled

authentication enabled

For example, the following commands disable accounting and enables

authentication for the RADIUS client on slot 2:

radius-client/2#

accounting disabled

radius-client/2#

authentication enabled

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 98 99

Sin comentarios

Avaya Configuring RADIUS Manual de usuario Pagina 37