Avaya Router Guía de inicio rápido descargar pdf (Pagina 57)

Using the BCC to Quick-Start a Router

308654-14.00 Rev 00

5-7

For example, enter:

ethernet/2/1# ip address 192.168.125.34 mask 255.255.255.0

ip/192.168.125.34/255.255.255.0#

The BCC automatically enables ARP on this interface and adds IP globally to

this router.

If your workstation is on the same LAN as the router, go to step 12

. If your

workstation is not on the same LAN as the router, add one of the following

routing protocols:

•RIP

• OSPF

• Static route

To add RIP as the routing protocol for this IP port, enter:

ip/192.168.125.34/255.255.255.0# rip

rip/192.168.125.34#

Go to step 12.

10.

To add OSPF as the routing protocol for this IP port:

At the IP interface prompt, enter:

ip/192.168.125.34/255.255.255.0# ospf area

<area_id>

For example, the following command assigns the IP interface that you

created to OSPF area 0.0.0.0, the OSPF backbone:

ip/192.168.125.34/255.255.255.0# ospf area 0.0.0.0

View the default values assigned to this OSPF interface.

ospf/192.168.125.34# info

area 0.0.0.0

authentication {}

type broadcast

priority 1

transit-delay 1

retransmission-interval 5

hello-interval 10

dead-interval 40

poll-interval 120

metric 1

mtu 1

mtu-mismatch-detect enabled

state enabled

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 131 132

Sin comentarios

Avaya Router Guía de inicio rápido Pagina 57