Avaya Video Camera 100 Installation Guide 14
5. Controlling the Camera Microphones
You can use Avaya Video Camera 100 as both the video and audio input for your Avaya
video communications system. If you do not have an Avaya Video Conference Phone 1000
or Avaya Video MicPod 1000 connected to your Avaya video communications system in
addition to Avaya Video Camera 100, and you use the default system settings, the system
uses Avaya Video Camera 100 as the active microphone.
If Avaya Video Camera 100 is one of several audio input devices connected to your system,
and you want Avaya Video Camera 100 to be the active microphone, you must explicitly set
the active microphone preference at Administrator Preferences : Audio : Active
Microphone. For more information on selecting the active microphone, refer to the Avaya
Video Communications Systems Administrator Guide.
Navigate to the System Information page on your Avaya system to verify which audio input
device is the active microphone. When the active microphone status is None, the No Active
Microphone indicator appears in the status bar indicating that no active microphone is
available.
To control the volume of the active microphone, adjust the Active Microphone Volume
preference in User Preferences or Administrator Preferences : Audio.
To mute or unmute the camera microphones during a call, press the mute button on the
Avaya remote control. A mute icon appears in the user interface. If an Avaya Video
Conference Phone 1000 or Avaya Video MicPod 1000 is connected to the system, you can
also mute the microphones on the camera by pressing the mute button on either of these
devices.
Troubleshooting
The following sections describe symptoms, possible causes, and potential solutions for
common problems you may encounter when installing Avaya Video Camera 100.
No Video
If no video appears in the display from the camera:
• Ensure that the camera cable is securely connected to the camera and to the
appropriate camera input on the codec and that nothing is obstructing the cable.
• Verify that the blue LED on the front of the camera is lit, indicating that the camera is
receiving power. Reboot the Avaya system if necessary to verify that the camera
receives power.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales