Avaya Red Hat Linux 9 DHCP Server Configuration for 4600 Series IP Telephones Manual de usuario descargar pdf (Pagina 7)

AM; Reviewed:

WCH 3/18/2004

Solution & Interoperability Test Lab Application Notes

7 of 10

Linux-DHCP.doc

4. Verification Steps

In the field, the following tests can be performed to verify the Linux DHCP server configuration

is operating correctly.

Step Description

From the Red Hat Linux server, issue the command “service dhcpd status” to find out if the

Linux DHCP server is running.

E[root@cvlan1 root]# service dhcpd status

dhcpd (pid 3613) is running...

[root@cvlan1 root]#

Reset the Avaya 4600 Series IP Telephones by pressing “MUTE (RESET) 73738 #” while

the phones are on-hook and idle. Press “#” when prompted to “Reset Values?”.

Verify the Avaya IP Telephones are able to obtain an IP address and scope options from the

Red Hat Linux DHCP server.

The IP telephones should display the following prompt after contacting the C-LAN card

specified in the DHCP server scope.

Extension=

#=OK New=

Enter an extension, ending with the “#” button. The following password prompt is displayed.

Password=

#=OK

Enter the extension’s password, ending with the “#” button. Verify successful registration to

Avaya Communication Manager.

While the telephones are on-hook and idle, use “MUTE (ADDR) 2337 #” to verify the

Avaya IP Telephone DHCP parameters.

Connect PCs to the Avaya IP Telephones and the Avaya P333R switch. Use the “ipconfig”

command to verify the PCs are able to obtain an IP address and scope options from the Red

Hat Linux DHCP server.

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Avaya Red Hat Linux 9 DHCP Server Configuration for 4600 Series IP Telephones Manual de usuario Pagina 7