Avaya Message Networking BCM Rls 6.0 Manual de usuario descargar pdf (Pagina 28)

Message Networking

28 NN40011-021 Issue 1.2 BCM Rls 6.0

AMIS Sites

This section applies to sites created for AMIS only. Before local subscribers

can send messages to another site using Site-Based Addressing, you must

add the site to your network.

1. Access CallPilot Manager.

2. Click the Networking heading. The Site List page appears.

3. Click the Add button. The Network Site Properties page appears.

4. Select the AMIS site type and configure as required. Click Submit

when finished.

5. You should now record the site name. Follow the steps detailed in the

Recording the Site Name section of this guide.

AMIS Site Properties Settings

Attribute

Description

Site name

The Site Name is a text name for the site that can be up to 16 characters.

This name is shown to local subscribers when they address a message or

review message envelope information. The site name is optional but

recommended.

Site prefix

The Site Prefix is a number one to nine digits long that identifies the site

on the network. This number must be unique. Make the Site Prefix a

number that is easy for users to recognize and remember. The Site Prefix

is usually the same as the sequence of digits that local users dial to place

a telephone call to the site. For example, if local users dial 403-123-4567

to call someone at the target site, then 403123 is an easily remembered

Site Prefix.

The Site Prefix cannot overlap any other Site Prefix in your Network Site

Table. For example, if you use Site Prefix 403123, it overlaps with prefixes

40312 and 4031234.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Sin comentarios

Avaya Message Networking BCM Rls 6.0 Manual de usuario Pagina 28