Avaya Contivity - BCM IPSec Peer-to-Peer Tunnel Manual de usuario descargar pdf (Pagina 19)

Tech Tip

Contivity Secure IP Services Gateway

Contivity – BCM IPSec Peer-to-Peer Tunnel Using Pre-Shared Key

Authentication

Set the Highest Encryption as desired and make sure it matches the Contivity setting. We will

set it to ESP- 3DES-MD5 as decided. This setting is enabled by default on the Contivity:

Set the Key Type to Text.

Set the Pre-shared Key to 12345 and confirm it to match the key entered in Contivity

configuration:

Leave the Rekey Timeout as the default value:

Leave the Rekey Data Count(KB) at 0. We are not using this for this setup:

Set the Local Endpoint to 30.1.1.1- LAN 2 IP Address of the BCM (Public):

Set the Remote Endpoint to 30.1.1.2 - Public IP address of the Contivity:

Leave the Send All Traffic Through IPSec Tunnel to default of No:

TT040922 1.00 September 2004 Page: 19 of 27

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Sin comentarios

Avaya Contivity - BCM IPSec Peer-to-Peer Tunnel Manual de usuario Pagina 19