Avaya Configuring XNS Services Manual de usuario descargar pdf (Pagina 66)

Configuring XNS Services

4-26 114055 Rev. A

A description of parameters in the XNS Static Routes window follows.

Parameter: Enable

Default: The Conﬁguration Manager automatically sets this parameter to Enable

when you click on Add in the XNS Static Routes window.

Options: Enable

| Disable

Function: Speciﬁes the state (active or inactive) of the static route record in the XNS

routing tables.

Instructions: Select Disable to make the static route record inactive in the XNS routing

table; the router will not consider this static route.

Select Enable to make the static route record active in the XNS routing

table.

MIB Object ID: 1.3.6.1.4.1.18.3.5.10.6.1.2

Parameter: Cost

Default: 0 router hops

Range: 0 to 15 router hops

Function: Speciﬁes the number of router hops added to an XNS data packet. The

router uses this parameter when determining the best route for a datagram

to follow. The cost is also propagated through RIP. The default setting of 0

for static routes gives them priority over RIP-learned routes.

Instructions: Enter the number of router hops.

MIB Object ID: 1.3.6.1.4.1.18.3.5.10.6.1.4

Parameter: Next Hop Host

Default: None

Options: Any valid host address in hexadecimal notation

Function: Speciﬁes the address of the next host in the static routing path.

Instructions: Enter a host address of up to 12 hexadecimal characters.

MIB Object ID: 1.3.6.1.4.1.18.3.5.10.6.1.6

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 75 76

Sin comentarios

Avaya Configuring XNS Services Manual de usuario Pagina 66