Avaya Configuring DECnet Services Manual de usuario Pagina 51

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 88
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 50
Editing DECnet Parameters
114050 Rev. A 3-5
Parameter: Level 1 Only Area
Default: 1
Range: 1 to 63
Function: Specifies the DECnet Area ID for all circuits if you configured the router
as Level 1 Only. The Area ID is the first 6 bits of a DECnet node address.
Instructions: Specify the Area ID by entering a number between 1 and 63. You cannot
configure this parameter unless you first configure the router to perform
Level 1 Only routing.
MIB Object ID: 1.3.6.1.4.1.18.3.5.2.1.20
Parameter: Broadcast Route Timer
Default: 180
Range: 1 to 65535
Function: Determines the maximum amount of time in seconds between routing
updates that the router issues. If no routing update occurs before this timer
expires, the router generates a routing update automatically.
Instructions: Enter a number between 1 and 65535. If you want the Bay Networks
router to generate routing updates more frequently, enter a lower value
than the current one.
MIB Object ID: 1.3.6.1.4.1.18.3.5.2.1.4
Parameter: Route Max Addr
Default: 1023
Range: 1 to 1023
Function: Specifies the highest Node ID contained within all areas.
Instructions: We recommend accepting the default value. If you change the default,
make certain to use the same value for each router in the network.
MIB Object ID: 1.3.6.1.4.1.18.3.5.2.1.6
Vista de pagina 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 87 88

Comentarios a estos manuales

Sin comentarios