Avaya BCM50 Guía de configuración descargar pdf (Pagina 29)

AT&T IP Flexible Reach and AT&T IP Flexible Reach with AT&T Business in a Box

Nortel BCM50 Release 3.0 SIP Configuration Guide

*Nortel, Nortel Networks, Nortel (Logo), the Globemark, CS1000 are trademarks of Nortel Networks.

Issue 1.5 Page 29 of 38

4.8 Configuring Incoming Calls from AT&T IP Flex Reach to BCM50

Configuration



 Telephony



 Sets 



 All DNs:

We will now configure the “called number translation” (incoming) for the DN

number. In our example, go to the “Line Assignment” tab located at the

bottom of the “Line Access” page. Enter 2000 in the “Priv. Received #” field;

then enter the last four digits of the DID (Public number) in the “Pub. Received

#” (Note: 10 digit entries are now supported with Release 2.0). Incoming DID

calls will be routed to telephones, based on the trailing portion of the digits

received by the network. For example, Incoming calls from the AT&T IP Flexible

Reach network will deliver a ten digit DID number, e.g. 7323683478. The BCM50

will route the call using the last four digits, e.g. 3478.

Additionally, this

configuration will allow incoming 4-digit dialing plan calls from the IP Flexible

Reach network, e.g. 3478.

Figure 20: Configuring DID for Incoming Calls

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 37 38

Sin comentarios

Avaya BCM50 Guía de configuración Pagina 29