Avaya AP-8 Nota de aplicación descargar pdf (Pagina 19)

CTM; Reviewed:

SPOC 10/15/2007

Solution & Interoperability Test Lab Application Notes

19 of 22

oneXmobileAP8

7. Verification Steps

The following steps may be used to verify the configuration.

Step Description

1. Verify that the Avaya one-X Mobile had acquired the wireless access point. This is

indicated by an icon in the upper right corner of the display comprised of four

connected squares. If the squares are filled in (solid), then the device has locked on to

the access point. If the squares are not filled in (open), then the device is not locked

on.

2. Verify that the Avaya one-X Mobile has registered with Avaya SES. To verify the

current registration state on the Avaya one-X Mobile:

 Press the Menu button on the Nokia phone.

 Navigate to ToolsÆSettingsÆConnectionÆSIP settings.

 A list of profiles is shown with the current registration state. Verify that the

profile created in Step 3 or 4 is shown as Registered.

To verify the registration on Avaya SES:

 Log in to the Avaya SES web administration interface as described in Section

4, Step 1.

 Navigate to UsersÆRegistered Users. Verify that the Avaya one-X user name

(30115) is registered with the IP address assigned to the Nokia phone in

Section 6, Step 1 (10.75.5.47).

3. Verify that calls can be made to/from Avaya one-x Mobile to SIP and non-SIP

endpoints on the enterprise.

4. Verify that inbound/outbound calls can be made from Avaya one-X Mobile and the

PSTN.

5. Verify that the Avaya one-X Mobile telephony feature menus invoke the corresponding

FNEs defined in the settings.1me file.

6. Verify that calls to Avaya one-X Mobile can cover to voicemail and that messages may

be retrieved. However, a message waiting indicator (MWI) is not supported.

8. Troubleshooting

This section provides troubleshooting tips for common problems.

 If the Avaya one-X Mobile does not lock to the wireless access point, verify that the Network

Name/SSID is configured the same on the Avaya one-X Mobile and the Avaya AP-8 wireless

access point. If the problem persists, the Avaya one-X Mobile should be power cycled to ensure

1 2 ... 14 15 16 17 18 19 20 21 22

Sin comentarios

Avaya AP-8 Nota de aplicación Pagina 19