Avaya an Expansion Module in a BayStack ARN Router (114202 Rev. A) Manual de usuario descargar pdf (Pagina 32)

Installing an Expansion Module in a BayStack ARN Router

1-10 114202 Rev. A

Figure 1-10. Inserting the Expansion Module

Press the module all the way forward into the expansion slot, until the

pins in the expansion module’s base module connector align with the base

module connector socket.

5. Press down on the corners of the module at either end of the base module

connector until the module connector slides securely into place.

6. Insert ﬁve screws and washers into the base module mounting standoffs

(Figur

e 1-11).

Use the ﬁve screws and washers that came with the expansion module kit.

7. Tighten the screws using a Phillips screwdriver.

8. With the clip side up, insert the expansion module power cable into the

power connector on the expansion module (Figur

e 1-11).

Be sure that the cable locks into place and is completely secured.

ARN0027A

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Sin comentarios

Avaya an Expansion Module in a BayStack ARN Router (114202 Rev. A) Manual de usuario Pagina 32