Avaya a WAN Adapter Module in a BayStack ARN Router (114204 Rev. A) Manual de usuario descargar pdf (Pagina 33)

Installing a WAN Adapter Module

114204 Rev. A 1-11

After completing the diagnostic testing procedure, the boot process begins.

The Run and Boot LEDs indicate the boot status as shown in T

able 1-1.

7. After the boot process completes, the Run LED lights and the Boot LED turns

off, indicating that the ARN is operational.

If the LEDs on the ARN light in this sequence, your upgrade is successful.

Contact the network administrator to verify that the ARN is now connected to the

network.

If the LEDs do not light in this sequence, the network administrator can refer to

Conﬁguring Remote Access to help troubleshoot the problem.

If you need additional assistance, contact your local Bay Networks Technical

Response Center.

Table 1-1. Boot Status LEDs

Boot Status Run LED Boot LED

Local Boot Off On

Netboot (attempting) Off Flashing

Netboot (downloading) Flashing On

Interrupted (using ARN monitor) Flashing Flashing

Note: If the ARN does not contain an expansion module, an adapter module, a

redundant power supply, a data collection module, or a Flash card, the LEDs

associated with these components remain off.

1 2 ... 28 29 30 31 32 33 34

Sin comentarios

Avaya a WAN Adapter Module in a BayStack ARN Router (114204 Rev. A) Manual de usuario Pagina 33