Avaya V1.0) Manual de usuario Pagina 2

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 4
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 1
Read Me First: Router Software 11.00 Rev. 4n and Site Manager 5.00 Rev. 4n
2
114593-A Rev. A
Integrated V.34 Console Modem Support
The V.34 console modem adapter module
Supports only Raise DTR
Does not support asynchronous PPP connectivity
Must be configured as Monitor and set to originate calls for
bandwidth-on-demand
Must be configured as Dial Master and set to originate calls for Dial Backup
Does not originate and answer calls simultaneously (therefore, must be set to
originate when BOD is configured as Monitor, or when Dial Backup is
configured as Master, and must be set to answer when BOD is Non-Monitor
or Dial Backup is Slave)
Netbooting over a DSU/CSU Interface
The ARN supports Netbooting over the DSU/CSU interface only for the default
configuration, 56-Kb/s DDS lines. You cannot netboot over a 64-Kb/s DSU/CSU
interface.
ARN Platform Known Anomalies
This section supplements the
Known Anomalies: Router Software 11.00 Revision
4n and Site Manager 5.00 Revision 4n
.
____________________________________________________________
Anomaly: Site Manager allows setting Modem Enable on the ARN console port, but the port does
not support a modem.
Number: 27605
Description: The Modem Enable parameter should always be disabled for editing. However, if you
edit Serial Port 1 and then Serial Port 2, the Modem Enable option is not dimmed when
returning to Serial Port 1.
Workaround: Do not set the Site Manager Modem Enable parameter to Enable, and do not set
wfSerialPortEntry.12.1 to 1 from the Technician Interface.
Note:
The ARN Console port does not support a modem. You must attach an
external modem to the ARN Modem port, or use the optional integrated V.34
console modem.
Vista de pagina 1
1 2 3 4

Comentarios a estos manuales

Sin comentarios