Avaya Business Ethernet Switch 50 Series Guía de configuración descargar pdf (Pagina 32)

32 Converged small site (mixed-vendor environment): reference topology 1

a. Click Conﬁguration > SLOT 0 – Radio A > Security.

b. Select the Enable check boxes for VAP0 and VAP1.

c. Click Submit.

4 To set the default VLAN ID on BAP120—802.11b/g radio

a. Click Conﬁguration > SLOT 1 – Radio G > Radio Settings to

access the Default VLAN ID (1~4094) table.

b. Enter the following individual settings for the VLAN IDs:

i. VAP0—1

ii. VAP1—2

iii. VAP3—1

iv. VAP4—1

c. Click Submit.

To enable Guest Access SSID on BAP120 – 802.11b/g radio

a. Click Conﬁguration > SLOT 1 – Radio G > Security.

b. Select the Enable check boxes for VAP0 and VAP1.

c. Click Submit.

To enable the VLAN on BAP120

a. Click System > VLAN to access the VLAN Conﬁguration table.

b. For the VLAN Classiﬁcation, select Enable.

c. Enter 1 as the Native VLAN ID.

d. Click Submit.

A conﬁrmation dialog box appears, asking you to conﬁrm

changes and informing you that you may lose connectivity to

the BAP120.

e. In the conﬁrmation dialog box, click OK, and then wait for

approximately 30 seconds before you proceed.

Disconnect the BAP120 from the VLAN #3 port, and then connect it

to one of the VLAN 2 ports on the BES100/200. For this example,

use port 2.

—End—

SMB

Small and Medium Business Solutions Overview and Conﬁguration Guide

NN47910-200 02.01 Standard

Release 1.00 11/22/2006

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 71 72

Sin comentarios

Avaya Business Ethernet Switch 50 Series Guía de configuración Pagina 32