Avaya B5800 Manual de usuario descargar pdf (Pagina 214)

Permanently removing a component

About this task

If you are permanently removing a component, when restarted the B5800 Branch Gateway

system configuration must be edited to remove redundant entries.

Procedure

1. Turn the B5800 Branch Gateway system off. See

System shutdown on page 208.

2. Remove the card or external expansion module.

3. Restart the B5800 Branch Gateway system.

4. Use Manager to delete the trunks or extensions/users in the configuration that relate

to the component removed.

5. In the Control Unit section of the configuration, delete the entry for the component

that is no longer present in the system.

Swapping extension users

About this task

This procedure explains how to swap extensions for two users. This example refers to User A

and User B which represent any two users for whom you want to swap extensions.

Procedure

1. Load the B5800 Branch Gateway configuration.

2. Select Extension.

3. In the Extension section of the window, select the extension for User A.

4. In the Base Extension field, change the extension to User B's extension.

Note:

If Manager is set to validate edits, a warning appears that says this change

conflicts with the existing Base Extension setting of another extension. Ignore the

warning at this stage. Click OK.

5. In the Extension section of the window, select the extension for User B.

6. In the Base Extension field, change the extension to User A's extension.

7. Save the configuration back to the B5800 Branch Gateway system.

Additional system procedures

214 Implementing B5800 Branch Gateway for a CS 1000 Configuration October 2012

1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 323 324

Sin comentarios

Avaya B5800 Manual de usuario Pagina 214