Avaya BCM 2.0 Networking Manual de usuario descargar pdf (Pagina 27)

Network Messaging using Enterprise Edge Message Networking 27

P0911952 Issue 02 Enterprise Edge 2.0 Message Networking Set Up and Operation Guide

Disabling Network Messaging using the Class of Service setting

You can restrict Network Messaging on an individual mailbox basis. You do this

through the Enterprise Edge Voice Messaging Class of Service designation.

Note: For information about Class of Service values, refer to Appendix A:

Enterprise Edge Message Networking Programming Record on page 33.

For information about changing a mailbox Class of Service, refer to the

Enterprise Edge 2.0 Voice Messaging Set Up and Operation Guide.

Sending Network Broadcast Messages

The Enterprise Edge Message Networking Network Broadcast feature lets you send

Broadcast Messages over the network. Broadcast Messages are recorded by you

and delivered to all Network Delivery Mailboxes. If this feature is disabled,

Network Delivery Mailboxes do not receive Broadcast Messages.

A Network Broadcast Message does not play immediately. It is left in a mailbox and

must be selected to play by the mailbox owner. For more information about

Broadcast Messages, refer to the Enterprise Edge 2.0 Voice Messaging Set Up and

Operation Guide.

Enabling Broadcast Message

Before Broadcast Messages can be sent over the network, you must enable

Broadcast Message.

To enable Broadcast Message:

1. Click the Networking menu and then click General Networking

Parameters.

The General Networking Parameters dialog box appears.

2. At the Network Broadcast option, select Yes.

3. Click the OK button.

Note: For instructions about sending Broadcast messages, refer to the Enterprise

Edge 2.0 Voice Messaging Set Up and Operation Guide.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 41 42

Sin comentarios

Avaya BCM 2.0 Networking Manual de usuario Pagina 27